Industrial Centrifugal Fan

4-72 C High Quality Big Centrifugal Fan

4-72-C Model Highlights:

 

  • Belt driven make  easily control speed.
  • Strong body with pure copper Increase the whole machine life.
  • Multi-functional in many area.
  • The air inlets of the fan is also made with fixed structure, located at the side of the fan, curve shape with the section of axial parallel, to ensure that air can be smoothly enter the impeller more efficiently.
  • This centrifugal fan can be used in ordinary for indoor ventilating, deliver air and other gas which is non-hypergolic, harmless to human and non-corrosive to metal.
  • The air which isdelivered by this product is forbidden to contain with stickum, also the dust and hard particle.

Centrifugal Fan And Rotary Blower | Backward Centrifugal Fan

 

4-72-C Model Features:

 

: Material Properties


:4-72-C type boiler centrifugal fan is designed to fit the equipment of heavy industries  which can burn any kind of coal base and equipped with smoke and dust-removal device. It is applicable as long as the air volume and the performance are fit the condition. However, the highest temperature shall not exceed 130℃. Our company can provide the stainless steel heat boiler centrifugal fan when the temperature of air must exceed 130℃. It can be used on many occasions transfer materials, ventilation and improvide motivation to systems.

 

: Selection

: The  centrifugal fan has single inlet, the model No. has No6,7,8,10,12,14,16, these  kinds.
: The centrifugal fan can be made into two forms which are left-hand rotated and right-hand rotated. Face the fan from one end of the drive set. If the impeller rotates clockwise, we called it right-hand rotated, in short we use “right” for expression. If the impeller rotates anticlockwise, we called it left-hand rotated, in short we use “left” for expression. 
: The position of the air outlet of the fan is indicated by the angle of the air outlet of the housing. “left” and “right” can be made into 0°,90°,180°three kind of angles. 

 

: Fan Structure


:  The boiler centrifugal fan is made by the impeller, housing, air inlet, driven set, regulating door and other parts. 
: The impeller has 12 backward inclined plate blades of 16Mn material, which are welded in the arc cone impeller cover and in the middle of the plate-shaped disc, and are corrected by dynamic balance. Therefore, it runs smoothly, has high strength and wear resistance, and has a long service life,



 

Model Power
(KW-P)
RPM
(r/min)
Air Volume(m³/h) Pressure(Pa )
6C 15-4P 2240 10314~20628 2734~1733
11-4P 2000 9209~18418 2176~1380
7.5-4P 1800 8288~16576 1760~1116
5.5-4P 1600 7367~14734 1389~881
3-4P 1250 5756~11511 846~537
2.2-4P 1000 4605~9209 541~344
1.1-4P 800 3684~7367 346~220
7C 18.5-4P 1800 13161~26322 2395~1519
15-4P 1600 11698~23397 1890~1199
11-4P 1450 10602~21204 1553~984
7.5-4P 1250 9140~18279 1151~731
5.5-4P 1120 8189~16378 924~586
4-4P 1000 7312~14623 736~468
8C 37-4P 1800 28105~36427 2920~2302
30-4P 1800 19646~25240 3143~3032
22-4P 1600 17463~22435 2478~2390
11-4P 1250 13643~25297 1507~1106
7.5-4P 1120 12224~15705 1209~1166
5.5-4P 1000 10914~14022 963~929
5.5-4P 900 14052~18213 725~572
3-4P 800 8732~16190 615~452
2.2-4P 710 7749~11085 485~450
10C 37-4P 1250 34863~48797 2373~1877
30-4P 1120 31237~43722 1902~1505
18.5-4P 1000 27890~39038 1514~1199
15-4P 900 25101~35134 1225~970
11-4P 800 22312~31230 967~766
7.5-4P 710 19802~27717 761~603
5.5-4P 630 17571~24594 599~475
12C 75-4P 1120 53978~75552 2746~2172
55-4P 1000 63953~67457 1859~1729
37-4P 900 43375~60712 1767~1399
30-4P 800 38556~53966 1395~1104
18.5-4P 710 34218~47895 1097~869
15-4P 630 30362~42498 863~684
11-4P 560 31774~37776 646~540
7.5-4P 500 24097~33728 543~430
14C 110-4P 1000 76535~107124 2985~2361
75-4P 900 68881~96412 2412~1908
55-4P 800 61228~85699 1903~1506
37-4P 710 54340~76058 1497~1185
30-4P 630 48217~67488 1177~932
18.5-4P 560 42859~59990 929~736
15-6P 500 38267~53562 741~587
11-6P 450 34441~48206 599~474
7.5-6P 400 30614~42850 474~375
5.5-6P 355 27170~38029 372~295

Quick Inquiry